, ,

Miller Multimatic 255 Multiprocess Welder w/ EZ-Latch™ Running Gear- 208-575V - 951767


-

Built for professionals in the MRO and light manufacturing/fabrication segments who want a smaller, versatile welder with intuitive setup to increase efficiencies and productivity. This inverter multiprocess elder is easy to use, will deliver versatility for faster uptime and performance, while allowing for portability.

Free gift
Free Gift with this Purchase! Add to Cart now to see your free gift! 
For a limited time only.

$5,047.00

Gtin 715959670944 SKU: 951767 Categories: , , Tags: , ,

Miller Multimatic 255 Multiprocess Welder w/EZ-Latch™ Single Cylinder Running Gear 951767

 

 

The Miller Multimatic 255 multi-process welder with EZ-Latch™ single cylinder running gear is a 350 amp, portable welder that is capable of MIG, Pulsed MIG, Stick, DC TIG and DC Pulsed TIG welding. The Miller Multimatic 255 comes complete with full color seven inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. In addition to built-in welding programs, the 255 can also store your custom welding programs. It seamlessly switches between welding with standard MIG gun or optional Spoolmatic™ spool gun. The 255 also features direct plug for XR push-pull gun for professional aluminum wire feed capability. This allows you to use 12 inch spools of aluminum MIG wire instead of the more expensive 1 lb rolls used with the spool gun.

 

EZ-Latch™ running gear with single cylinder cylinder rack gives unmatched portability to the Multimatic 255. For moving around the shop, the 255 attaches to the running gear through a series of four, quick-disconnect latches. For times when your 255 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 255 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit.

NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in three steps and include: cart with front caster wheels, cylinder tray with rear wheels and cylinder post.

 

The Miller Multimatic 255 runs on 208 to 575 volt input power, using Miller’s Auto-Line™ technology that automatically detects input voltage. It comes complete with MIG welding gun, shielding gas regulator with hose, stick electrode holder and ground clamp. TIG welding kit is sold separately.

Processes:
MIG (GMAW)
Pulsed MIG (GMAW-P
Stick (SMAW)
Flux Cored (FCAW)
DC TIG (DC GTAW)
DC Pulsed TIG (DC GTAW-P)

Versatility
Multiprocess Capabilities of MIG, Pulsed MIG, Stick (6010), DC Lift Arc TIG and DC Pulsed TIG
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Auto-Line™ Technology
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past
Auto-Set™ Elite
offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
MDX-250 MIG Gun w/ AccuLock™ S consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance.
Portability – Machine only weighs 84 lb
Weight is reduced by more than 50 percent compared to transformer welding machines
Optional EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability
  • Power source with 10 ft. (3 m) power cord
  • 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
  • 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector
  • 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector
  • Flow gauge regulator and gas hose for argon or AR/CO2 mix
  • Extra contact tips
  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls
  • EZ-Latch™ single-cylinder running gear
  • Chain to secure gas cylinder
  • Material thickness gauge

PROCESSES

TIG DC (GTAW-DC)
Stick (SMAW)
Pulsed TIG (GTAW-P)
Pulsed MIG (GMAW-P)
MIG (GMAW)
Flux Cored (FCAW)
Aluminum Welding

GENERAL SPECIFICATIONS

Title Multimatic® 255 Multiprocess Welder w/ EZ-Latch™ Running Gear- 208-575V
Weldable Metals Steel
Stainless Steel
Aluminum
Input Voltage 208 V
220/230/240 V
460/480 V
575 V
Input Phase 1-Phase
Input Hz 50 / 60 Hz
Input Amperage 34.7
Current Type DC
Max Open Circuit Voltage 81 VDC
Wire Feed Speed 50 IPM – 800 IPM
Portability Handle(s)
Running Gear / Cart (Standard)
Weld Output CC / CV
Warranty 3 Years
Miller’s True Blue Warranty
Gtin 715959670944 SKU: 951767 Categories: , , Tags: , ,